NEC ELITE IPK PRI lines ringing NEC ELITE IPK PRI lines ringing AdanPMtz01 (TechnicalUser) (OP) 2 Jun 23 07:08 How do i get extensions on a nec elite electra ipk system to ring incomming 4 digits using T1 PRI ? Cant find anything related. . Thank RE: NEC ELITE IPK PRI lines ringing belevedere (Instructor) 2 Jun 23 11:03 First, your extensions must be 4 digits, or if they are 3 digits, then the PRI needs to send 3 digits. Then you DIT it to a corresponding extension number. Place that number on additional phones using the extension appearance on a button. (CAR key assignment) RE: NEC ELITE IPK PRI lines ringing AdanPMtz01 (TechnicalUser) (OP) 2 Jun 23 12:45 First let me thank you for your valuable knowledge and experience response on this subject. They already have some DITs (1588) targeting (ringing) the corresponding 4 digit Extensions (101 & 102. I must pick (1555) add this DIT to 2 extensions(201 & 202) I went rhrough 777 pages in the manual but I was paying attention to the Memory Block referring(Ringing) Feature. I will read the manual and find DIT Memory Block and Extension appearance (CAR Key assignments). Thank you! RE: NEC ELITE IPK PRI lines ringing OldNECguy (Vendor) 2 Jun 23 17:44 You could turn on digit conversion in 1-1-21 (assuming your trunks are DID in 3-91) and translate your 4 digits to any extension number in 1-1-22.