Lantronix SLC 8000 Console Mgr
Lantronix SLC 8000 Console Mgr
(OP)
I have a dual PS 16 port SLC 8000
Client only wants to use (1) PS of the (2) ... any trick to turning off the alarm that occurs by not powering up the 2nd PS?
Don't want to have to swap the dual for a single PS ...
Thanks!
Client only wants to use (1) PS of the (2) ... any trick to turning off the alarm that occurs by not powering up the 2nd PS?
Don't want to have to swap the dual for a single PS ...
Thanks!