SIP trunk configuration on hipath 4000
SIP trunk configuration on hipath 4000
(OP)
hello;
could any one give me the required config (command line on comwin) to configure one sip trunk on hipath 4000 V6 , STMI4 ard configured with FCTBK=2 ( BCHL3550=20, BCHLSIP= 20 , BCHL3550=20)
best regard
Taha OKACHA
could any one give me the required config (command line on comwin) to configure one sip trunk on hipath 4000 V6 , STMI4 ard configured with FCTBK=2 ( BCHL3550=20, BCHLSIP= 20 , BCHL3550=20)
best regard
Taha OKACHA
RE: SIP trunk configuration on hipath 4000
sbcsu has set up some sort of file server, are the edoku files on there ?
RE: SIP trunk configuration on hipath 4000
ADD-BFDAT:2,SIP&HG3530&HG3550,BCHL60;
CHA-BFDAT:CONT,2,SIP,20,,20;
CHA-BFDAT:CONT,2,HG3530,20,,20;
CHA-BFDAT:CONT,2,HG3550,2,1,;
CHA-BFDAT:OK,2,YES;
RE: SIP trunk configuration on hipath 4000
#Moriendi WHERE CAN I FIND THIS Edoku IP Solutions . WOULD YOU MENTION THE LINK PLEASE
RE: SIP trunk configuration on hipath 4000
RE: SIP trunk configuration on hipath 4000
Look in Docs/OpenScape 4000 V10
RE: SIP trunk configuration on hipath 4000
OKACHA
So what are you stuck on ?
Are you adding 2 trunks ?