Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

911 calls hear busy

Status
Not open for further replies.
eartel

eartel

Vendor
Mar 10, 2003
214
US
We have an Option 11 release 23 and we can dial 9,911 but when we dial 911 we hear a busy signal. LD 90 shows SPN 911 RLI 0

 
Sort by date Sort by votes
Run the conversation Utility tool to determine all the outgoing codes. Also check that your extensions haven't got PREO set to 1 or 2 etc for pretranslation dialling.

It could be that your outgoing route is wrong.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
Guessing your AC1 is 9 then SPN 911 so 9-911 required, do you have an SPN of 11 for example (AC1 9 + SPN 11)?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

shaikh007
  • Locked
  • Question
extension ringing but user can hear ring
Replies
1
Views
379
Firebird Scrambler
Firebird Scrambler
MoJHK
  • Locked
  • Question
Busy tone after hangup
Replies
1
Views
337
MoJHK
MoJHK
Jose Carrasco
  • Locked
  • Question
PCA goes busy
Replies
1
Views
280
Firebird Scrambler
Firebird Scrambler
bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
303
bltodd
bltodd
krtcomm1
  • Locked
  • Question
CLID on tandem calls outbound to PSTN when calls are forwarded externally
Replies
6
Views
483
krtcomm1
krtcomm1

Part and Inventory Search

Sponsor

Back
Top