Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

No audio on IP-CCIS

No audio on IP-CCIS

No audio on IP-CCIS

I have one site that has an 8100 and the other site is a 9100 CP20 and I cannot get audio on IP-CCIS calls. The calls setup and can be answered, just no audio.

The customer's public IP address changed on the 8100 site so at the same time, the customer changed the IP scheme for the 8100.

I updated the public IP in 10-12-07 and changed 10-12-09 (IP), 10-12-10 (subnet), 10-12-03 (gateway) and 84-26 (DSP IP) for the 8100.

Customer is using Fortinet firewalls and has a VPN between sites. They confirmed SIP ALG is disabled and set up port forwarding rules for 10020-10531 to the 84-26 IP address.

Generally with audio issues, its a network setting, unless my IPL card suddenly failed coincidentally.

It did work before the IP address changes. Not sure what we're missing.

RE: No audio on IP-CCIS

Hello conxtel,

Make sure you update the ip change on the 8100 in 50-03 as well.

RE: No audio on IP-CCIS

Yes, 50-03 was changed as well.

RE: No audio on IP-CCIS

You have to reboot the 8100 for any of that to update. Also teh 9100 will need updated IP addresses as well.

RE: No audio on IP-CCIS

Yes, 8100 was rebooted after the change. IP address was updated in 50-03 in the 9100 as well.

RE: No audio on IP-CCIS

Check 10-58 and make sure your new scope is in that.

RE: No audio on IP-CCIS

I've never used 10-58 when for CCIS. Isn't that just for IP terminals?

RE: No audio on IP-CCIS

No..that defines your network routing for the system.

RE: No audio on IP-CCIS

I sent a Wireshark file to NTAC and they can see audio leaving my 9100 on port 10028 and reaching the IP of the 8100 on port 10024 at the second location, but no audio was returning. They were kind of surprised that there wasn't at least audio in one direction.

I still think there is something they are missing in their Fortinet programming but the other possibility is a failure with the IPLB daughter board. Has anyone seen a no audio issue on one before?

RE: No audio on IP-CCIS

We had many issues with getting fortinet routers to work with this system. Can you try a simple router as a test. Temporarily replace the fortinet.

RE: No audio on IP-CCIS

Fortinet has their own VOIP system built into their firewalls. This needs to be disabled. MANY IT guys don't realize this and will spend hours trying to fix routing issues.

RE: No audio on IP-CCIS

Customer found the problem in their Fortinet:

"It was from the policy we had configured for the tunnel on the SV9100 side, forgetting to turn NAT off. It is now working perfect."

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close