×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

CDG Card clearing the alarm Dispaly

CDG Card clearing the alarm Dispaly

CDG Card clearing the alarm Dispaly

(OP)
Hi Moriendi,

I added 30 channels from the existing CDG Card unit 1 and activated, after activation some channels are already used/busy, but I noticed one thing in CDG Card display still shows P instead of A means both Circuits are active.

Kindly need your advice on how to clear the alarm (P) and instead the display should be A.

Thanks

RE: CDG Card clearing the alarm Dispaly

It's not a case of clearing alarms and forcing the display to A. The display will go to A automatically once the second link is properly in service. It sounds like you have an issue with your config or the E1. If you can, and config is the same, move the circuit from cct 0 to cct 1 and see if the display changes.

RE: CDG Card clearing the alarm Dispaly

(OP)
Hi Moriendi, CCT0 is already active and running, I don't want to disturb that active E1. When I activated the CCT1, I didn't even reset just the direct activate command, do you think if I can reset (deactivate and reactivate) it will change the display?

Thanks for your quick reply

RE: CDG Card clearing the alarm Dispaly

(OP)
Hi again Moriendi in addition to CCT1, I can see that some channels are used and also I performed the testing from DX side by ceasing the trunk (##80 TRK MBR and dialing the Ext #, connected to CCT1 and it went through. Is there any command from Unify that I can cease an active trk from cct1 or like trk maintenance?

Thanks

RE: CDG Card clearing the alarm Dispaly

You can reset the circuit with res-dssu.
Or, with dea-dssu and act-dssu.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close