×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

My ADP reaches 4 and restarts . IDE

My ADP reaches 4 and restarts . IDE

My ADP reaches 4 and restarts . IDE

(OP)
My ADP reaches 4 and restarts . IDE1 and IDE2 are off and not blinking. there is no communication.Slowly the cards leds in SWUs are becoming red. any idea

RE: My ADP reaches 4 and restarts . IDE

What is the software version? And hardware (duplex or simplex)?

RE: My ADP reaches 4 and restarts . IDE

(OP)
its Hipath 4000 , version 4, duplex

RE: My ADP reaches 4 and restarts . IDE

Turn off the processor box.
Remove the ADS processor.
Remove the SIM card. Put this module aside.
Remove any SWU processor, install a SIM card in it. Insert this processor in place of ADS.
You can extract additional RAM or try to do without it.
Turn on the power and watch the download.

RE: My ADP reaches 4 and restarts . IDE

Turn off the processor box? At the moment they have some working telephony but we don't know what's wrong. If the HD tray is faulty they will not be able to restore service!

Reboot on 4 is what - module test? So faulty processor is possible. But they are hot swappable.

I would remove the processors from ADP and standby SWU. Swap the ADP SIM card over to the other processor, and try to boot ADP. So same thing, but you don't need to power off, Active processor will remain running. If it still loops at 4, there could be another module causing the problem so then you are looking at a parts swapping exercise, maybe the MCM is dragging it down.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close