Trunking IP Hipath 4000
Trunking IP Hipath 4000
(OP)
thread965-1740928: HiPath 4000 IP Trunking
Hi, everyone.
first time asking something in this forum but I have been consulting this for a long time to know more about hipath 4000.
I need to create a new trunking ip using a stmi4, I have already some ip trunk created as I'll show below.
ADD-TDCSU:NEW,1-01-079-0,250,201,0,0,150,32,32,"TRK IP ",168,"ECMAV2",8,,NONE,,,,GDTR,N,TIE,NONE,N,0,,,,,,,31,MANY,78,0,1,1,EMPTY,250,1,N,,,,,,16,8,1,10,,EC&G711&G729A&HG3550,,150,CIR,Y,SECURE,0,60,60,HG3550IP,1&&30,N,1,,0,0,0,0,0,N,,NONE;
I don't know what "168" means before "EACMAV2". I've been comparing this value whit other trunking ip created on other hipath 4000 units working, but I don't completly understand.
I'll be deeply greatfull if anyone can help me.
(Sorry if mi english is too poor but I'm a little rusty
.)
Hi, everyone.
first time asking something in this forum but I have been consulting this for a long time to know more about hipath 4000.
I need to create a new trunking ip using a stmi4, I have already some ip trunk created as I'll show below.
ADD-TDCSU:NEW,1-01-079-0,250,201,0,0,150,32,32,"TRK IP ",168,"ECMAV2",8,,NONE,,,,GDTR,N,TIE,NONE,N,0,,,,,,,31,MANY,78,0,1,1,EMPTY,250,1,N,,,,,,16,8,1,10,,EC&G711&G729A&HG3550,,150,CIR,Y,SECURE,0,60,60,HG3550IP,1&&30,N,1,,0,0,0,0,0,N,,NONE;
I don't know what "168" means before "EACMAV2". I've been comparing this value whit other trunking ip created on other hipath 4000 units working, but I don't completly understand.
I'll be deeply greatfull if anyone can help me.
(Sorry if mi english is too poor but I'm a little rusty

RE: Trunking IP Hipath 4000
RE: Trunking IP Hipath 4000
Log on to HiPath
CHA-FUNCT:REGIN=Y;
Click up top 'Macro/Retreive System Variant'
After that then
REG-TDCSU;
Then RIGHT MOUSE CLICK on the line (ADD-TDCSU) - (anywhere on the line) and click 'MML-Editor'
RE: Trunking IP Hipath 4000
I already knew what was the parameter's name, maybe I did't express myself in the right way becouse of mi english
Anyway I Already resolved the problem, thank ypu so much for your help!