Unify 4K Hunt VCE Features 1

The 4K won't allow you to hunt around external PSTN destinations. You can get it to forward off a member to an external destination, but once it's gone, it won't come back. So for two external lines, you'd have to configure the hunt group as cyclic. If it was linear, the same person would get every call, once it went external.

For config, the forward must be a CFU. It won't work with a CFNR. SA parameters EXECCFW 'execute call forwarding from hunt group' and LVAFTEXT 'leave hunt group after network member' must be set to Y. If either it set to N, the call will stay ringing internal.

Hi Moriendi, Thanks for your quick reply, but from the internal hunting then Ext1 manually activated the VARIABLE FORWARD to Mobile because the other employee after office hours need to answer the call using her Mobile #.

I don't understand that reply. Ext1 manually activated a fwd to mobile. That's OK. It must be a CFU. Once the call is ringing on that mobile it will stop hunting.

Can You help me? external incoming call (mobile or fixed) from caller 1 to internal 7700. 7700 after conducting a call can transfer it to another internal number. But CAN`T transfer to external - he can do CONSULT call, can create CONFERENCE but cant TRANSFER. After choose "transfer", dial mobile or fixed number and calling, 7700 replace the handset and receive CALLBACK whith caller 1. caller 2 disconnect. THANKS!!