Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cp110 g2 phone question

Status
Not open for further replies.
wanyin

wanyin

Technical User
Jul 18, 2022
67
CN
I failed to register an hfa cp110 g2 phone in the hipath4000v8 system ,the phone display HV. Can someone give me some suggestions?
The hipath 4000 version IS v8r2,and there is already some ip phone(openstage 35g) in use
I have update the stmix LW but no effect, should i update the stmix OS version and where i can download the os version software?
stmix2_pfobvn.png
system1_ei8yth.png
 
Sort by date Sort by votes
Please check the relase notes for the 110 phone.
It states in there that it is compatible with OpenScape 4000 V10R1.2.8.0 or Later
 
Upvote 0 Downvote

Thanks for sbcsu, but the wiki website shows that the cp110 g2 phone is compatible with the hipath 4000 v8r2. This makes me very confused
 
Upvote 0 Downvote
Well I don't know so !
Ensure that the phone is at the correct version as required V2R0.3.1 and later

Also I was looking at the CP110 HFA NOT the G2 version so I think you are correct - !
 
Upvote 0 Downvote
Support for the CP110 comes in HF61 for V8 R2. So you should be on at least that version and then look again.

Your STMIX is on V8 R0 while the 4K is on V8 R2. That does not cause good things. I would not expect that to be your problem here but you should fix it nonetheless.
 
Upvote 0 Downvote
Indeed - the system should be updated anyway to the last available releases of software for V8R2 before any phones are added.
 
Upvote 0 Downvote
MAC address 001ae8de4318
Software version V2 R0.6.1 HFA 221125
Last restart 2023-01-16T05:16:58
phone software version is correct.
now i will try to update the stmix from v8r0 to v8r2, does anyone konw where can download the software?
 
Upvote 0 Downvote
You have to update the system to the latest release of each item that you have shown above - Assistant, CSTA etc.
Then also ALL the loadwares have to be transferred.
The system needs to be at the last releases of everything - then you can update the phones etc. and test
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Itusdo
  • Locked
  • Question
Openscape Desk Phone G2 CP710 with Openscap 4000 V10R1.42
Replies
0
Views
178
Itusdo
Itusdo
Y
  • Locked
  • Question
OpenScape Desk Phone CP205T OpenScape 4000
Replies
5
Views
509
sbcsu
sbcsu
Itusdo
  • Locked
  • Question
How to active Sip MWI on CP110 with OS4000 V10 R1.42
Replies
7
Views
472
member 1453342
M
wanyin
  • Locked
  • Question
how to set openstage 10 t phone from openstage mode to openpoint mode?
Replies
12
Views
910
wanyin
wanyin
wanyin
  • Locked
  • Question
OSB Individual Speed Dialing question
Replies
2
Views
525
wanyin
wanyin

Part and Inventory Search

Sponsor

Back
Top