Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CMDU reseat guide
- Thread starter Everest67
- Start date
Firebird Scrambler
Systems Engineer
Best to email me off line.
Go into LD 135 or 137 and key in STAT CPU to check the current CPU status.
In LD 43 key in DAT to check the backup status.
The CPU that is offline can be removed if the system isn't split. CPU status will tell you all this infomation.
Try just doing a EDD in LD 43. Sometimes you have to do a EDD CLR if the system has suffered a blip on the power or connections etc.
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
Go into LD 135 or 137 and key in STAT CPU to check the current CPU status.
In LD 43 key in DAT to check the backup status.
The CPU that is offline can be removed if the system isn't split. CPU status will tell you all this infomation.
Try just doing a EDD in LD 43. Sometimes you have to do a EDD CLR if the system has suffered a blip on the power or connections etc.
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
- Thread starter
- #3
Hi Firebird Scrambler.
Thank you for the reply. When performing EDD on LD 43 all is okay until it reach data dump
on Floppy diskette. The dump always failed. This is on both CMDU 0 and 1. As initial
action I'm planning to reseat the CMDU card without doing the split mode. This might resolve
the dump issue on floppy diskettes. I have use several diskettes but no joy.
Is it okay to reseat CMDU without splitting the cores? Any other options to possibly fix the BKO?
Thanks
Thank you for the reply. When performing EDD on LD 43 all is okay until it reach data dump
on Floppy diskette. The dump always failed. This is on both CMDU 0 and 1. As initial
action I'm planning to reseat the CMDU card without doing the split mode. This might resolve
the dump issue on floppy diskettes. I have use several diskettes but no joy.
Is it okay to reseat CMDU without splitting the cores? Any other options to possibly fix the BKO?
Thanks
Firebird Scrambler
Systems Engineer
If the data dump is failing when it goes to the floppy disk, then it might be worthwhile checking the floopy disk.
Thay are known to fail.
You can reseat the CMDU on the off line one without causing too much hassle.
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
Thay are known to fail.
You can reseat the CMDU on the off line one without causing too much hassle.
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
- Thread starter
- #5
![[smile]](/data/assets/smilies/smile.gif "[smile] [smile]")
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question