Nortel CallPilot 201i
Nortel CallPilot 201i
(OP)
I recently got a Nortel CallPilot 201i for free from a friend that was pulled out of a system a while back. I just powered up my option 11 today with the callpilot installed and when it boots, it prompts for a password which obviously is normal but the problem is that I do not know the password nor does the person who removed it. I was thinking of factory resetting it but I also do not have the keycodes for it so I can't actually use it if I did that. Any Suggestions?
Nortel Meridian 1 & CS1000 enthusiast/programmer.
Fire Safety and Security Enthusiast.
https://vrryan6.com
https://YouTube.com/vrryan6
RE: Nortel CallPilot 201i
Don't attempt a restore unless you have all the keycodes.
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = http://somertel.net
linkedin
RE: Nortel CallPilot 201i
Nortel Meridian 1 & CS1000 enthusiast/programmer.
Fire Safety and Security Enthusiast.
https://vrryan6.com
https://YouTube.com/vrryan6
RE: Nortel CallPilot 201i
Like you say to reset it you need the SCSI CDROM, Keycodes, and surely doesn't the Callpilot keycode need to be under the TID/site ID of the CS1000
RE: Nortel CallPilot 201i
There's also some default passwords you might want to try, see step 7: Link