Nortel M3904 issue with the phone
Nortel M3904 issue with the phone
(OP)
I currently have the phone in the office and just had an issue of the phone itself.
It happened while talking on the phone and it shut itself down. There is a phone with cross sign displaying on the LCD.
Is there anyway I can repair it by myself on this or do I need to replace a new one?
Kindly see the picture for more info.
It happened while talking on the phone and it shut itself down. There is a phone with cross sign displaying on the LCD.
Is there anyway I can repair it by myself on this or do I need to replace a new one?
Kindly see the picture for more info.

RE: Nortel M3904 issue with the phone
Assuming that the replacement phone works in the socket, then it proves that the extension wiring and port is OK.
Put the phone with the symbol in the working socket to confirm where the problem is.
If the wiring or socket appears to be the issue, then there is a good chance that the phones port is disabled as this can happen over night when the system does it's routines.
If you know the phones TN details, then go into e.g. LD 32 and key in ENLU "tn".
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = http://somertel.net
linkedin
RE: Nortel M3904 issue with the phone