ok so i have some TSG 1120SS phones and for the life of me cant figure out why they are not getting power when i connect to an Avaya 4550-PWR switch. If i take the same phone over to an older 470 series PWR switch, the phone comes up just fine, but the newer 4550-PWR switch will not power the phone. And for those of you itching to ask, yes POE is enabled because my standard 1120E phones comes up just fine on my 4550. A friend of mine tried the 1120SS phone on an even newer 5xxx series ERS switch and nothing. Is there a newer firmware perhaps for the Avaya 1120SS phones that anybody knows of? or is this something else entirely? I did figure out how to manually get the phone to boot up by holding down the reset button on the back, but that doesnt exactly work very well aside getting it to take power at the very least. Im guessing it will be a firmware issue on the CS1000 for the IP Phones, but if anybody has any ideas please advise. thank you kindly
Red Flag Submitted
Thank you for helping keep Tek-Tips Forums free from inappropriate posts. The Tek-Tips staff will check this out and take appropriate action.
Reply To This Thread
Posting in the Tek-Tips forums is a member-only feature.