Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEAX 2400 ipx EMA card replacement
- Thread starter Jewelll
- Start date
DoubleDriveLine
IS-IT--Management
If your EMA card is bad you have reached the end of the line for your 2400 IPX. The hardware key code is burned to the EMA card. You can't change it out the EMA without loading a new license file and activating it. You can't do that because the 2400 has been EOL for many years. NEC no longer supports it for any licensing.
You will need to replace the whole system.
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
You will need to replace the whole system.
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
- Thread starter
- #3
DoubleDriveLine
IS-IT--Management
Your system has lost its activation
On the top of PC Pro menu bar look for System | Activation
It allows you to bring up AACT to register the activation code to the system.
You must have the activation code that was sent out with the system. The original install disks. If you don't have that you can't register the system.
If you have it then registration would work provided the license file on the hard drive is unchanged. The activation code is for the license file. The license file has to be written for the Hardware Key code burned into the EMA card.
If those are lost or location unknown there is no way to activate the system.
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
On the top of PC Pro menu bar look for System | Activation
It allows you to bring up AACT to register the activation code to the system.
You must have the activation code that was sent out with the system. The original install disks. If you don't have that you can't register the system.
If you have it then registration would work provided the license file on the hard drive is unchanged. The activation code is for the license file. The license file has to be written for the Hardware Key code burned into the EMA card.
If those are lost or location unknown there is no way to activate the system.
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
- Thread starter
- #5
DoubleDriveLine
IS-IT--Management
You can't fix that issue. You can't replace the EMA card because the hardware key code is burned to the EMA card. Once you change it your license file is invalid. Since NEC will not sell licenses for the 2400 you are SOL.
Time to move on.
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
Time to move on.
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
- Thread starter
- #7
Hello
I need to communicate NEAX-2400 IPX system with my PC via com port (with I/O card). Can anyone help me please inform how to connect MAT Tools with RS-232 cable. I have DTE cable, PL2303 cable, USB to DB9, all cable drivers and also Mat Tools installed on windows7 OS PC. I can't connect via lan because of activation code Error (ema Issue). please share me the solution link or instractions to connect.
Thanks,
Shahidull
I need to communicate NEAX-2400 IPX system with my PC via com port (with I/O card). Can anyone help me please inform how to connect MAT Tools with RS-232 cable. I have DTE cable, PL2303 cable, USB to DB9, all cable drivers and also Mat Tools installed on windows7 OS PC. I can't connect via lan because of activation code Error (ema Issue). please share me the solution link or instractions to connect.
Thanks,
Shahidull
DoubleDriveLine
IS-IT--Management
You need 2 NEC Proprietary cables to connect to the IOC card port 0 for the MAT. Then you will need a 25 pin to 9 pin serial cable or adapter.
Note no you cannot custom make one as NEC never provided the pin out.
Links are provided to reference what the cables look like.
IPX 2Port CA-A "Y cable" note these cables are notorious for going bad.
NEC 2400 RS-232C CA-1
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
Note no you cannot custom make one as NEC never provided the pin out.
Links are provided to reference what the cables look like.
IPX 2Port CA-A "Y cable" note these cables are notorious for going bad.
NEC 2400 RS-232C CA-1
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
- Thread starter
- #9
- Thread starter
- #10
Hello everyone
I need the NEAX-2400 IPX system to communicate with my PC via com port (with I/O card). Can anyone help me how to connect pcpro via serial cable. I've collected proprietary cables. My presant problem is activation code error. if I contact this via I/O card with conn0 will it solve my problem?
Thanks
DoubleDriveLine
IS-IT--Management
No you will still have an activation code problem. Until the system is activated you cannot connect with PC Pro.
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
- Thread starter
- #12
- Thread starter
- #13
- Thread starter
- #14
DoubleDriveLine
IS-IT--Management
That version of software was for the NEAX 2000 IPS and earlier 2000's. It is not for the 2400 of any version.
Prior to the change to PC Pro I don't recall what the old software might have been called. If your IPX is version R12 or higher you should be using PC Pro. It will work just fine.
It should go without saying unless you get the activation code you are not connecting to the system. It doesn't matter what software you have.
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
Prior to the change to PC Pro I don't recall what the old software might have been called. If your IPX is version R12 or higher you should be using PC Pro. It will work just fine.
It should go without saying unless you get the activation code you are not connecting to the system. It doesn't matter what software you have.
There are 10 kinds of people in the World.
Those that understand Binary and those that don't.
belevedere
Instructor
You need the IPX MAT. However, it will not help you if the system is not properly licensed and registered.
- Status
Similar threads
- Locked
- Question