show outgoing call telephone number from meridian in siemens pabx
show outgoing call telephone number from meridian in siemens pabx
(OP)
i take analog line from option 51c meridian and put it as trunk line in other PABX from SIEMENS when i make call from nortel meridian to the connected line as trunk in siemens 3800 everthing work fine it's ring and make call but not display this incoming call number information "DN" in the screen phones of SIEMENS just write "number unavailable" how can i make outgoing call from meridian through this trunk line appear telelephone number
(DN) or even name of caller
P.S: the second PABX is from Siemens
(DN) or even name of caller
P.S: the second PABX is from Siemens
RE: show outgoing call telephone number from meridian in siemens pabx
RE: show outgoing call telephone number from meridian in siemens pabx
is there a way to do it without this Card ?
RE: show outgoing call telephone number from meridian in siemens pabx
CLID for an analog phone is sent via modem-like signaling between the first and second ring. You need the NT5D60 to send that signal.
RE: show outgoing call telephone number from meridian in siemens pabx
i don't deal with it before
and what about digital card is they can send this information through analog line that i used as trunk in siemens 3800
if client with meridian digital line make call to ip phone in siemens through the meridian analog line trunk , will information be transmitted and appear in screen of siemens ip phone ?
RE: show outgoing call telephone number from meridian in siemens pabx
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = http://somertel.net
linkedin
RE: show outgoing call telephone number from meridian in siemens pabx
You are correct that this is more properly done with a PRI/DPNSS/SIP trunk between the two systems.
RE: show outgoing call telephone number from meridian in siemens pabx