×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

MCR

MCR

(OP)
I have a 500 DN as part of a group of digital sets. I added MCRA in the CLS .How do I make it as non ringing ? I changed it to MCNA in the CLS but when I do a print it still shows MCRA even though it it took it when I put in MCNA
Thanks

RE: MCR

2
There is no non-ringing option for a 500 set in the CLS. You would have to turn off or disconnect the ringer.

The CS1000 was interpreting your MCNA as NAMA, a totally different feature.

So why did it take MCNA?
Back in the day, many of the commands were created so that they could be changed using the dialpad of a phone or attendant console. So entering M or N is the same as the digit 6 on the dialpad. C and A are equivalent of digit 1. This doesn't always apply everywhere now but it's still a thing, especially with LD 10, 11 or 32.

Example - when logging in, the command is "supposed" to be
logi <userid>
But we can use
loii <userid>
or even
5644 <userid>

This also explains why the * is so important in CS1000 commands.

RE: MCR

(OP)
Thank you very much for the explanation

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close