Remove PRI, Add FALC - Meridian Option 11 Remove PRI, Add FALC - Meridian Option 11 ttts974 (Programmer) (OP) 8 Dec 21 11:50 Hello, for technical needs, I would like to know how to replace a PRI card into a FALC card. I'm afraid of breaking the system. Does anyone have the controls to do this? The PRI is currently in slot 3. Thank you very much! RE: Remove PRI, Add FALC - Meridian Option 11 KCFLHRC (TechnicalUser) 8 Dec 21 19:07 So a FALC Card is new to me, had to Google it but it is some kind of analog line card. But regardless what you want to put in that slot the programming of the PRI card will have to be removed. That requires Outing the trunks Outing the route Outing the D-Channel Removing the DLOP in the CEQU removing the clock controller programming Is this PRI not in use? Not a lot of work really but you do need to know the commands and what you are doing and it does have to be done in a particular order RE: Remove PRI, Add FALC - Meridian Option 11 ttts974 (Programmer) (OP) 9 Dec 21 04:39 Hello thank you. Yes, it is an analog card. Currently on the system, we have 2 PRI cards, one in slot 1, the other in 3. The one in slot 3 is not used. The idea is to replace the PRI with an analog. RE: Remove PRI, Add FALC - Meridian Option 11 Firebird Scrambler (Programmer) 9 Dec 21 08:06 Yep!. It's a analogue 16 port extension card. It's what we use in the UK. Firebird Scrambler Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer Website = http://somertel.net linkedin RE: Remove PRI, Add FALC - Meridian Option 11 KCFLHRC (TechnicalUser) 10 Dec 21 13:17 Definitely can be done. You just have to out everything associated with that PRI first.