×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

MDF Wiring for SL-1

MDF Wiring for SL-1

MDF Wiring for SL-1

(OP)
A technician is at one of our sites to punch down some phones. He's struggling to find the ports I provided.
He sent pictures of the blocks, the port numbering ends at 7. The system has many ports in the 8-15 range.
In a Nortel, are the switchtails connected in such a way that all 16 ports aren't consecutive, are split between blocks?
We often dispatch techs for Nortel phones and haven't run into this before.
I've tried researching in Nortel manuals and a couple of sites I have bookmarked, but MDF connections aren't covered.
Thanks for any input.

RE: MDF Wiring for SL-1

it is quite normal to wire Krone strips in 8's so like you say 0-7 on first strip and 8-15 on second so 16 ports. On older Option 51/61/81 CS1000M etc. the IPE cabling was all 24 on first cable was on the first card then second cable was split 16 on second card and then first 8 of 3rd card, then third cable would be last 8 of 3rd card and remaining 16 on forth card. Then same again 24/16/16/16 etc.

RE: MDF Wiring for SL-1

(OP)
Thanks! I did read that somewhere, will have to review it again. This is similar to what we run into with Avayas because of skipped pairs. That's why proper labeling is critical.

RE: MDF Wiring for SL-1

This would be an example for LSA 10 Krone taken from the manual NN43021 Large System Installation and Commissioning there is a section on planning MDF

RE: MDF Wiring for SL-1

You said SL-1 and not Meridian 1. Do you still have QSU phones? What kind of switch and card are you using?

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close