I want to limit the number of Rings on any extension
I want to limit the number of Rings on any extension
(OP)
I want to limit the number of Rings on any extension
normally it rings too many times I want to call ring 6 to 8 times and if not attended it automatically disconnect
normally it rings too many times I want to call ring 6 to 8 times and if not attended it automatically disconnect
RE: I want to limit the number of Rings on any extension
I want to limit the number of rings on local extension
RE: I want to limit the number of Rings on any extension
go to LD 20 and print the TN for the phone. Look at the RCO setting. This corresponds to DFN0, yada yada. (RCO 0 = DFN0). If you want to change, you need to change the DFN0 in the RDR block, then change your phone to reflect this number. This will change all phones with that specific setting. So any phones with RCO 0, when you change DFN0, all those will change. Try using DFN2 as DFN0 is most likely the default
John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services
Public Profile
http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/