MynaVoice for Avaya CM MynaVoice for Avaya CM Craft01 (TechnicalUser) (OP) 13 Oct 21 11:16 I'm using MynaVoice to record calls of IP extensions of Avaya COMMUNICATION MANAGER, what is the solution if users are in remote mode and IP changes? can we use MAC adresse? can anyone help in this query? REGARDS RE: MynaVoice for Avaya CM kyle555 (TechnicalUser) 13 Oct 21 14:58 Recorders typically use AES. It's the Avaya CTI middleware for 3rd party applications. It lets a recorder know what's going on with a station and can trigger a conference with a recorder extension to record it. How does your thing integrate? RE: MynaVoice for Avaya CM DAVIDPAYNE (IS/IT--Management) 20 Oct 21 13:01 I have never heard of that system before. The web site didn't have a lot of information, but it does have some sort of CTI integration. I would assume it using AES as that what that is for. You should contact the MynaVoice Vendor to be sure how it is setup. RE: MynaVoice for Avaya CM biglebowski (TechnicalUser) 21 Oct 21 07:32 Mynavoice was an old Cybertech product before they were bought by NICE, looks like they've restarted the product name as a new company. If it's the old Cybertech guys it should support CTI based selective recording via DMCC or SPAN. Even without CTI it should still be ok in passive mode as the recorder sniffs the signalling and creates a local mapping table of extns to IP addresses from the registrations Biglebowskis Razor - with all things being equal if you still can't find the answer have a shave and go down the pub.