×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

*
*
*
*

Thanks. We have received your request and will respond promptly.

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Option11C errors

thread798-1812088

Option11C errors

Option11C errors

(OP)
Good Morning,

I purchased a second hand option 11c cabinet and was looking to configure it as a homelab with simple use which I have had some success with so far thanks in part to helpful people on this forum.

I have been trying to get a bunch of the old programming off of it and keep getting these error messages repeatedly every 15 seconds or so which makes it very disruptive to keep track of things. How do I solve this?

CODE --> 

TMDI210 1

IOD040 03

BERR705 EXC 0: Bus Error in Task "tSL1" (0x207ec2a0)
       SR=0x3008, PC=0x10f42cb6, Addr=0xb000c150, SSW=0x105

BERR705 EXC 0: Bus Error in Task "tSL1" (0x207ec2a0)
       SR=0x3008, PC=0x10f42cb6, Addr=0xb000c150, SSW=0x105

Any help is appreciated. Thanks!

Thanks,
werman

RE: Option11C errors

I would log into the system and in LD 43, key in DAT to see if the Option_11c is backing up its data OK. I would also get the information for the keycodes and parameters in case the software needs to be installed again.

Also do a EDD in LD 43 to confirm that the data is being backed up.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: Option11C errors

TMDI210 appears to be complaining about a TMDI card which would likely be for a PRI trunk in slot 1. Since this is in a home lab you probably don't have PRI trunks. Maybe you don't even have a TMDI card.
The IOD040 3 is probably a D-channel configured on that TMDI card.
Just guessing though.
Maybe post the CFN from LD 22.

RE: Option11C errors

(OP)
Hello this is the CFN from LD 22

CODE --> 

REQ  prt
TYPE cfn

ADAN     TTY 0
  TTY_TYPE SDI
  CAB 00
  CARD 00
  PORT 0
  DES  Modem_9600
  FLOW NO
  USER MTC SCH BUG
  TTYLOG    1000
  BANR NO
ADAN     TTY 1
  TTY_TYPE SDI
  CAB 00
  CARD 00
  PORT 1
  DES  Alarm_9600
  BPS  9600
  BITL 8
  STOP 1
  PARY NONE
  FLOW NO
  USER MTC TRF SCH CTY BUG
  TTYLOG    1000
  BANR NO
ADAN     TTY 2
  TTY_TYPE SDI
  CAB 00
  CARD 00
  PORT 2
  DES  CDR_2400
  BPS  9600
  BITL 8
  STOP 1
  PARY NONE
  FLOW NO
  USER MTC CTY
  TTYLOG       0
  BANR NO
ADAN     TTY 3
  TTY_TYPE SDI
  CAB 01  FIBR
  DES  TechPlugIn_9600
  FLOW NO
  USER MTC TRF SCH BUG
  TTYLOG    1000
  BANR NO
ADAN     AML 9
  CARD 10
  PORT 1
  DES  MM_HSL
  BPS  4800
  CLOK EXT
  IADR 003



PAGE 001

  RADR 001
  T1   10
  T2   002
  T3   040
  N1   128
  N2   08
  K    7
  RXMT 05
  CRC  10
  ORUR 005
  ABOR 005
  ENL  YES
ADAN     DCH 11
  CTYP TMDI
  CARD 01
  PORT 1
  DES  QSIG_2
  USR  PRI
  DCHL 1
  OTBF 32
  PARM RS232  DTE
  DRAT 64KC
  CLOK EXT
  IFC  ISGF
    PINX_CUST 0
    ISDN_MCNT 300
  CLID OPT0
  CO_TYPE  STD
  SIDE NET
  CNEG 1
  RLS  ID  26
  RCAP COLP NDI CCBI CCNI PRI DV3I QMWI
  PR_TRIGS DIV 2 3
           CNG 2 3
  PR_RTN NO
  MBGA NO
  OVLR NO
  OVLS NO
  T310 120
  T200 3
  T203 10
  N200 3
  N201 260
  K    7
ADAN     DCH 12
  CTYP TMDI
  CARD 02
  PORT 1
  DES  bellpri
  USR  PRI
  DCHL 2
  OTBF 32
  PARM RS232  DTE
  DRAT 64KC
  CLOK EXT
  IFC  NI2
    ISDN_MCNT 300
  CLID OPT0
  CO_TYPE  STD
  SIDE USR
  CNEG 1



PAGE 002

  RLS  ID  **
  RCAP COLP
  MBGA NO
  OVLR NO
  OVLS NO
  T310 120
  T200 3
  T203 10
  N200 3
  N201 260
  K    7
  BSRV  NO
ADAN     DCH 13
  CTYP TMDI
  CARD 03
  PORT 1
  DES  qsig_cisco
  USR  PRI
  DCHL 3
  OTBF 32
  PARM RS232  DTE
  DRAT 64KC
  CLOK EXT
  IFC  ISGF
    PINX_CUST 0
    ISDN_MCNT 300
  CLID OPT0
  CO_TYPE  STD
  SIDE NET
  CNEG 1
  RLS  ID  26
  RCAP COLP NDI CCBI CCNI PRI DV3I QMWI
  PR_TRIGS DIV 2 3
           CNG 2 3
  PR_RTN NO
  MBGA NO
  OVLR NO
  OVLS NO
  T310 120
  T200 3
  T203 10
  N200 3
  N201 260
  K    7
PARM
  LPIB 350
  HPIB 250
  500B 350
  NCR  1300
  MGCR NULL
  CSQI 80
  CSQO 80
  TUBO NO
  CFWS YES
  PCML MU
  ALRM NO
  ERRM ERR BUG AUD
  DTRB 100
  TMRK 128
  FCDR OLD
  PCDR NO



PAGE 003

  TPO  NO
  TSO  NO
  CLID YES
  DUR5 NO
  MLDN YES
  MARP YES
  FRPT NEFR
  DCUS NULL
  MSCL 2500
  PMSI
    MANU PMS1
    PMCR 20
    PORT NONE
  NDIS 20
  OCAC NO
  MTRO MR
  SBA_ADM_INS 001
  SBA_USER 010
  BCAP SPEECH
  IDLE_SET_DISPLAY
  CLNP YES
  ICON YES
CEQU
  MPED 8D
  SUPL  000  004  008  012
        016  032  036  040
        044  048  064  068
        072 P112
  XCT   000
  CONF  029  030  031  062
        094  095

  DLOP  NUM DCH FRM TMDI LCMT YALM T1TE TRSH
   PRI  01   23  ESF YES  B8S  FDL  0    00
        02   23  ESF YES  B8S  FDL  0    00
        03   23  ESF YES  B8S  FDL  0    00
  MISP
OVLY
  SID  1265
  BKGD 044
  PBXH X
  TODR 22
  DROL 034 036 037 038 043 060 135
  MULTI_USER ON
VAS
  VSID   09
    DLOP
    AML  09
      SECU NO
      INTL 0001
      MCNT 9999
      CONF DIR
ATRN
  CODE 0
  SOLR 12
  ROLR +45.00
  AOLR +45.00
  TOLR -45.00
  AGCD NO
  VOLR NO
  HRLR +42.00



PAGE 004

  HTLR -44.00

I'm honestly a little lost as to what to do with this information haha.
Just trying to eliminate the errors popping up every 30 seconds.

Thanks,
werman

RE: Option11C errors

I have a problem with Central Meridian Option 11c It stopped working after a short power outage and all cards are red
Please help, thank you and respect

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login
Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close