linuxsnoop
MIS
I'm using 2 USB bootable drives to install AVP, as I don't have a USB DVD drive. Do I need to modify the kickstart.cfg file to tell the system to boot from a USB rather than a DVD?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Avaya Virtual Platform - USB Boot w/Kickstart File Modification
- Thread starter linuxsnoop
- Start date
- Status
phoneguy55
Programmer
Just plug in the USB drive and put the AVP cd in the server. Boot the server and AVP will install. When the cd ejects, remove the USB drive.
- Thread starter
- #3
linuxsnoop
MIS
Thank you phoneguy55, but I have no dvd drive. Many Business Partners are doing this process using 2 USB drives with no DVD drive in sight.
phoneguy55
Programmer
Ah, I see. haven't tried that. All my installs involve a dvd drive. I would assume there is a bios setting in the server to boot from USB. Is this a dell server?
- Thread starter
- #5
linuxsnoop
MIS
I'm with you, as this is new to me on the USB installs. This is an S8300E in the G450.
- Status
Similar threads