×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Forwarding to LD # on PRI

Forwarding to LD # on PRI

Forwarding to LD # on PRI

(OP)
I have a customer that is located on the other side of the state from me and I'm trying to set up a forwarded extension so that I can make some test calls. I have remote access and have pointed one of their DIDs to a test user I set up. I can set the forward to an 800 number and the call goes through, I can have it call a local number, but if I try to forward to my shop number or any other long distance number it just rings and never is connected. If the IPO was blocking the long distance calls, I would expect to get the turkey tone. How can I narrow down where the call is ending? Im not a wiz with monitor but it looks like the call is going through to the provider.


2310805398mS CMTARGET: ISDN BChannel 1: in-service check = 1
2310805399mS CMLineRx: v=2
CMSetup
Line: type=Q931Line 2 Call: lid=2 id=6 in=1
Called[2549] Type=Unknown (0) Reason=CMDRdirect SndComp Calling[87272871304] Type=Unknown Plan=ISDN Pres=Allowed (0)
BC: CMTC=3K1Audio CMTM=CallIndSigCon CMTR=64 CMST=Default CMU1=ULaw
BChan: slot=0 chan=1
IE CMIESupplementaryService (3)
Interpretation APDU
rejectAnyUnrecognisedInvokePdu
2310805399mS CMCallEvt: 0000000000000000 0.32134.0 -1 BaseEP: NEW CMEndpoint f186f644 TOTAL NOW=3 CALL_LIST=0
2310805399mS CMTARGET: ISDN BChannel 1: in-service check = 1
2310805400mS CMCallEvt: CREATE CALL:11701 (f187af8c)
2310805400mS CMCallEvt: 0000000000000000 0.32135.0 -1 BaseEP: NEW CMEndpoint f513da64 TOTAL NOW=4 CALL_LIST=0
2310805405mS CMCallEvt: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: StateChange: END=A CMCSIdle->CMCSDialInitiated
2310805405mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: LOOKUP CALL ROUTE: GID=1 type=0 called_party=2549 sub= calling=87272871304 calling_sub= dir=in complete=1 ses=0
2310805405mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: SET BESTMATCH: length 4 vs -1 match=9544682549 dest=7950
2310805406mS CMCallEvt: Priority hike: call 11701 priority 0->1
2310805406mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: LOOKUP ICR: DDI= CGPN=87272871304 (Destination 7950 ) => CDPN=7950
2310805406mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: ADD TARGET (N): number=7950 type=0 depth=1 nobar=1 setorig=1 ses=0
2310805406mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: SET USER: Test Fwd orig=1
2310805406mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: ADD USER: Test Fwd depth=1 disallow_cw=0 dnd=0 real_call=1 group_call=0 type(CMNTypeUnknown) incl(0x0) excpt(0x0), allow_redir(1) remote=00000000 simult 0 (0) r_lic=T
2310805407mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: ADD TARGET (N): number=817275045394 type=100 depth=2 nobar=1 setorig=0 ses=0
2310805407mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: SYS SC: 817275045394 2 17275045394 sc=type=Dial code=8N, num=N callinfop->sending_complete=1 secondary_dialtone=
2310805408mS CMARS: FindActiveARSByGroupID GroupID=51 - Found
2310805408mS CMARS: MakeCallTarget - Called Number: 17275045394
2310805408mS CMCallEvt: 0000000000000000 0.32136.0 -1 BaseEP: NEW CMEndpoint f181daf0 TOTAL NOW=5 CALL_LIST=1
2310805409mS CMTARGET: FoundKnownSystemTargets ICR cache hit
2310805409mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: INITIAL TARGETING SUCCEEDED
2310805409mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: GetNoAnswerTimer:15
2310805410mS CMCallEvt: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: StateChange: END=A CMCSDialInitiated->CMCSDialled
2310805410mS CMCallEvt: 0000000000000000 0.32135.0 11701 TargetingEP: StateChange: END=B CMCSIdle->CMCSOffering
2310805411mS CMCallEvt: 0000000000000000 0.32136.0 11701 ARS for BCPA: StateChange: END=T CMCSIdle->CMCSOffering
2310805412mS CMCallEvt: 0000000000000000 0.32136.0 11701 ARS for BCPA: StateChange: END=T CMCSOffering->CMCSOverlapRecv
2310805412mS CMCallEvt: 0000000000000000 0.32135.0 11701 TargetingEP: StateChange: END=B CMCSOffering->CMCSOverlapRecv
2310805412mS CMARS: FORM: BCPA - Received Number: 17275045394
2310805413mS CMARS: FOUND A SHORT CODE - short_code: 1N; - Tel: 1Ns9545225334 - Called_Party: 17275045394 - Line Group Id: 1
2310805413mS CMARS: SetCurrentTarget: Short_Code: 1N; - Line_Group_ID: 1
2310805413mS CMARS: FindActiveARSByGroupID GroupID=1 - Not Found
2310805413mS CMTARGET: Group Id: 1 has NOT been found in Line: 1
2310805413mS CMTARGET: Group Id: 1 has NOT been found in Line: 13
2310805413mS CMCallEvt: 0000000000000000 0.32137.0 -1 BaseEP: NEW CMEndpoint f1858050 TOTAL NOW=6 CALL_LIST=1
2310805414mS CMTARGET: ISDN BChannel 23: in-service check = 1
2310805416mS CMARS: ModifyCMARSTarget: Short_Code: 1N; - Line_Group_ID: 1 set line status to CMARS_TRYING
2310805416mS CMARS: FOUND LINE - Line Id: 2 - using line group id: 1 (code 1N;, line 1) - Called Number: 17275045394 - Calling Number: 9545225334
2310805416mS CMARS: SEND Setup TO LINE
2310805416mS CMCallEvt: c0a8965000007d89 0.32137.0 11701 Q931 Trunk:2 CHAN=23: StateChange: END=T CMCSIdle->CMCSOffering
2310805488mS CMLineRx: v=2
CMProceeding
Line: type=Q931Line 2 Call: lid=0 id=32137 in=0
BChan: slot=0 chan=23
2310805489mS CMARS: LINE ep Received: CMProceeding - child->state = CMCSOffering - ARS Call State = CMCSOverlapRecv
2310805489mS CMCallEvt: c0a8965000007d89 0.32137.0 11701 Q931 Trunk:2 CHAN=23: StateChange: END=T CMCSOffering->CMCSAccept
2310805529mS CMLineRx: v=2
CMProgress
Line: type=Q931Line 2 Call: lid=0 id=32137 in=0
IE CMIEProgressIndicator (30) cs=CMCSITUT (0), loc=CMLPublicNetLocalUser (2), pd=CMPDNotISDN (1)
Cause=170, Interworking Unspecified(IPO)
2310805529mS CMARS: LINE ep Received: CMProgress - child->state = CMCSAccept - ARS Call State = CMCSOverlapRecv
2310805529mS CMCallEvt: c0a8965000007d89 0.32137.0 11701 Q931 Trunk:2 CHAN=23: StateChange: END=T CMCSAccept->CMCSRinging
2310805529mS CMCallEvt: c0a8965000007d89 0.32137.0 11701 Q931 Trunk:2 CHAN=23: StateChange: END=T CMCSRinging->CMCSAccept
2310805529mS CMCallEvt: c0a8965000007d86 0.32136.0 11701 ARS for BCPA: StateChange: END=T CMCSOverlapRecv->CMCSAccept
2310805530mS CMCallEvt: 0000000000000000 0.32135.0 11701 TargetingEP: StateChange: END=B CMCSOverlapRecv->CMCSRinging
2310805530mS CMCallEvt: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: StateChange: END=A CMCSDialled->CMCSRingBack
2310805535mS CMLineRx: v=2
CMFacility
Line: type=Q931Line 2 Call: lid=2 id=6 in=1
IE CMIESupplementaryService (3)
Interpretation APDU
rejectAnyUnrecognisedInvokePdu
CallingName.Invoke.CodePageISO8859-1
invokeId 1
user 'TSS USA' presentation Allowed
2310805535mS SS : c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1 Received SSMsgData 10(SSMsgData::CallingName) 1(invoke)
2310805536mS SS : c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1 ProcessCMIESS, processing name type 110 (added name IE to CMMessage)

********** SysMonitor v11.0.0.1.0 build 8 [connected to 192.168.150.80 (BCPA)] **********
2310815409mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: TimerExpired cause=CMTCCoverageTimeout
2310815409mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: GetNoAnswerTimer:15
2310820409mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: TimerExpired cause=CMTCNoAnswerTimeout
2310820409mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: Retarget NOANSWER EXCEPTED=00000008 INCLUDED=00000008 ValidTargets=0
2310820409mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: Retarget on target_cfg_user=Test Fwd
2310820409mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: ADD USER: Test Fwd depth=1 disallow_cw=0 dnd=0 real_call=1 group_call=0 type(CMNTypeUnknown) incl(0x8) excpt(0x8), allow_redir(1) remote=00000000 simult 0 (0) r_lic=T
2310820410mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: SELECT: TRY VOICEMAIL orig_hg() orig_user(7950)
2310820410mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: VM targeting failed. Remaining on final target Test Fwd
2310820410mS CMTARGET: c0a8965000007d86 2.6.1 11701 Q931 Trunk:2 CHAN=1: GetNoAnswerTimer:15

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close