×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

IP Softphone and KX-TDA30 - no audio

IP Softphone and KX-TDA30 - no audio

IP Softphone and KX-TDA30 - no audio

(OP)
Hi,

I have KX-TDA30 and IP-EXT4. I used it with KX-NT136 IP phone and it worked flawlessly. But when I installed IP Softphone on a PC in the same network it didn't work. It connected to the PBX and I could dial an external number, but there was no audio (even after pressing 'SP-PHONE' button). I checked IP traffic and there are only packets sent between ports 9300-9301 and 2427-2727 when I pick up the phone. No other traffic comes out of the PBX (the router doesn't filter it anyway, because KX-NT136 works). What could be the reason?

Best regards,

Piotr

RE: IP Softphone and KX-TDA30 - no audio

TDA30 has to be ver. 4.0000 or later

Can you connect and speak to an analog extension? Is there any problems in this case?

------------
Telephone communication like an air: you do not notice it until you spoil it.

RE: IP Softphone and KX-TDA30 - no audio

(OP)
It is 4.0, because earlier versions didn't support IP-EXT4, so I had to upgrade.

I can connect from the softphone to analog extension or to external number - everything on the "signaling" level works. I have messages displayed on the LCD in the softphone, etc. But there is no audio in both directions.

A regular IP phone (KX-NT136) works in the same place, so it's surely not a network or firewall issue.

Best regards,
Piotr

P.S. To be clear: I mean the IP softphone, the software run on a PC to "emulate" a regular phone, I think it's product code is KX-NCS8100. I'm testing it in 60-days test mode without license.

RE: IP Softphone and KX-TDA30 - no audio

Well, I think you have a Panasonic Unified PC Maintenance Console (UPCMC) to maintaine your PBX, don't you?
If yes, you can try the following:
1) connect your PC (with UPCMC installed on it) instead of PBX,
2) install UPCMC onto PC with IP-Softphone KX-NS8101,
3) start VoIP Test Tool (that is built in UPCMC) at both PCs to check your network conditions

Also it can be a problem of software installation, try to re-install IP-softphone under Administrator permissions.

You should to choose an option "IP-Extension card installed in KX-TDA/KX-TDE (License is required in this PC)" in "IP Extension type selection" dialogue window when starting up the application.

One more point of problem appearance could be at your PC-audio (it is just an assumption).

------------
Telephone communication like an air: you do not notice it until you spoil it.

RE: IP Softphone and KX-TDA30 - no audio

What version KX-NCS8100 do you use?

RE: IP Softphone and KX-TDA30 - no audio

(OP)
Panasonic IP Softphone Version 5.0.0.20

Piotr

RE: IP Softphone and KX-TDA30 - no audio

(OP)
I installed older version - 4.1.0.133 - and it works :)

Perhaps v5.0 requires 5.0 firmware in the PBX?

Piotr

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close