call maximums/limitations on analog T1 / fraud or call record recording error suspected.

consultinggal · Dec 24, 2020

Have an analog T1 (not ISDN PRI) that is multiplexed so that 8 of the channels are dropped off as copper analog lines going into a voice system (not IP.

I am trying to find a maximums table(s) or math equation to back into it) that will enable me to calculate how many possible "maximum" calls can be made over the 8 copper lines in any given 1 minute period.

Can anyone direct me to any limitations tables? Or a formula?

Thank you in advance.

Set_Gilleng · Jan 27, 2021

I also need to find answer to your question. Hope someone will help us..

LoPath · Jan 28, 2021

I wouldn't think there would be a set number. Each call is going to take at least a couple of seconds to be setup and complete. So going by that, it would be difficult to complete more than 30 calls in a minute on one line. Multiply by 8.

See:

https://en.wikipedia.org/wiki/Call_setup

LoPath
Maintain HiPath 4000 V5 & V6, OpenScape Xpert V4 & V6, OpenScape Xpressions V7, OpenScape Contact Center V8, OpenScape Voice V9

sbcsu · Jan 28, 2021

https://www.erlang.com/calculator/

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

call maximums/limitations on analog T1 / fraud or call record recording error suspected.

consultinggal

Technical User

Set_Gilleng

MIS

LoPath

Technical User

sbcsu

Technical User

Similar threads

Part and Inventory Search

Sponsor