Plantronics CS50 with HL 10 lifter

Question

Plantronics CS50 with HL 10 lifter

wardy5 (TechnicalUser)

(OP)

25 Oct 20 10:15

Hi All. This is all very new to me so possibly posted in wrong area. My apologies, Tried a CS50 with lifter on my shop phone ( CICS ),, worked fine....Took out to my customers and hooked up. ( CICS also ). Don't seem to get the tone in earpiece for notification of incoming calls.. Any ideas ??

MooreTel (Programmer) · Answer 1 · 2020-10-25 14:01:51

RE: Plantronics CS50 with HL 10 lifter

MooreTel (Programmer) 25 Oct 20 14:01

Check your connections...

curlycord (Programmer) · Answer 2 · 2020-10-25 15:58:18

Are the software and the programming of the sets the same as your lab rat?

________________________________________

=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

allworxguy (Vendor) · Answer 3 · 2020-10-25 19:00:17

Make sure the mic connected to the lifter is taped to the speake. Telephone speaker is between the handset cradle.

Marv ccna

Trason (MIS) · Answer 4 · 2020-10-27 18:36:47

The mic has to hear a noise over a certain loudness. try turning the ringer volume up some.

MooreTel (Programmer) · Answer 5 · 2020-10-28 11:26:21

Is the phone at your client programmed to ring or just appear?

wardy5 (TechnicalUser) · Answer 6 · 2021-03-03 11:37:39

RE: Plantronics CS50 with HL 10 lifter

wardy5 (TechnicalUser)

(OP)

3 Mar 21 11:37

Thanks Everyone. Got it going.

wardy5 (TechnicalUser) · Answer 7 · 2021-03-14 13:28:11

one more silly question. Does the CS540 with lifter give you a notification ( beep ) when you push button on earpiece to hang up ??

snowman50 (TechnicalUser) · Answer 8 · 2021-03-15 10:27:01

I love a mystery.

Are you going to tell us how you got it going.

It’s nice to know how the fix was achieved.

👍

Come Join Us!

Posting Guidelines

Plantronics CS50 with HL 10 lifter