×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Mitel 3300/SX-2000 cabinets

Mitel 3300/SX-2000 cabinets

Mitel 3300/SX-2000 cabinets

(OP)
So I had the idea of pairing a 9400-800-201-NA SX-2000 light cabinet with an existing 3300. As far as I can tell from literature out there, it sounds like you need a Triple FIM card to do this. The prices for these, if you can find them at all, seem exceptionally high though. Is it possible to use other, more readily available FIM cards like the 9400-300-308-NA to interface these cabinets with the 3300?

Thanks!

RE: Mitel 3300/SX-2000 cabinets

2000 per nodes only require standard FIM. The triple is used to connect the SX2000 where the CPU, DSU and PERIPHERAL CONTROLLER are located in the same cabinet. You should be aware thta as of Release 8.x the peripheral nodes are not supported. (You can program them but if you have problems, Mitel will not support the configuration.

I suppose you're entitled to your opinion, I'm just not going to suppose very hard.

RE: Mitel 3300/SX-2000 cabinets

Actually support for the 2000 per nodes was discontinued above MCD rel 6.0

RE: Mitel 3300/SX-2000 cabinets

(OP)
Thanks! If you don't mind one more question, can any of the SX-2000 loop start trunk cards support caller ID? None of the documentation I can find references much more than the fact that the cards exist.

RE: Mitel 3300/SX-2000 cabinets

I have no memory of this but I would bet that the cards would be labelled as CLASS if they supported Caller ID

RE: Mitel 3300/SX-2000 cabinets

For Caller ID you would need a MC320EA ONS CLASS Line Card (16 circuits) or MC320FA ONS CLASS Line Card with Positive Disconnect (16 circuit).

RE: Mitel 3300/SX-2000 cabinets

(OP)
Wouldn't that be for stations though, and not for trunks? I know the early ASUs won't support CLASS trunks, but that's the only exception I can find.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close