The file is too large to attach here. Provide a temperary email address. After you get the file delete your post.

If possible, I'd like to get those files as well so I can get the DT700 to work with Asterisk. Here's a temp email jaldustemp at gmail dot com

Will delete once I get the files

Thank you

I will need an email address for drop box access. You can delete the post it after you get the file.

jaldustemp@gmail.com

Done.

Done. Please remove your post after you get the files. This keeps your email address private.

Hi Belevedere, Could i please get the firmware as well? vince@inotek.ca

Done. Remove your email after you get the file.

Look for an email. After you get the files, delete this post. Do not leave your eamil open for spammers.

I cant see any option to delete my post with the email

Thank you very much Belevedere!
Can you send me also IP Phone Manager?
(mail deleted)

I do not have that program available.

SIR.i also need this sip firmware this is my mail mit_rat8@yahoo.co.in
plz give me

Cabajo Try asking for IP Phone Manager here....

https://www.australiancommsforum.com/?forum=351449

mit_rat8@yahoo.co.in check your email.

i check my mail.NO Email come by you

Perhaps you should check the email address you supplied. I have never come across an email address with a space in it or am I reading it wrong?

Ozziegeorge, thanks very much. Found it!
Thanks again!

Thank god i found this Forum.

I have one DT700 which i am trying to configure as a sip phone at home with my fritz.box.

I searched everywhere but i couldnt find ip phone manager and the Flash file. Actualy i have Hardware Ver 9.1.3.3 Firmware Ver 3.0.0.0.

Is it please possible for me to also get the files?

e-Mail facebook@cibu.de

Thanks in advance.

Regards

xRockx
Ars1989
Check your emails for the link. Remove your post after getting the files so you do not get spammers. I do not have the phone manager. Post for it, or look for an existing post to get it. You can always use pumpkin to load the files. A free tftp program.

Hi Belvedere,

thanks a lot. I am not able to delete my email. There is no icon for changes.

I´ll try pumpkin. Did not manage to find phone manager.

Again. Thanks a lot. Will reply if it works. Will try to bind old DT700 to a 3cx Server.

Greets
Rock

Is it please possible for me to also get the files?

e-Mail
Thanks.

Check your email. You should delete your post and remove your email when done.

Thank you.

Done. Delete your post to remove your email after you get the files.

Done

Thank you, greatly appreciated!

Done.

Hope you're well

We don't have access to DropBox, are you able to share over google drive or mega.io

thanks

I do not. I can give you a temporary log in to drop box with an email address.

Done.

Could I abuse of the availability of Belevedere to request the firmware as well to use Nec DT700 series with asterisks?

email: *********@*********.****

Done.

Thank you very much.

May your code compile and your memory be error free.

Please send me DT700 standard sip firmware, Thank you.

xxx@xxx.com

I've got it. Thank you so much.

Hello is it possible to get the files? ruben@debeuze.com Thanks

Check your email

Please send me DT700 standard sip firmware, Thank you.

blackraide@protonmail.com

Hi

I am looking firmware to upgrade NEC DT900 Series Phone to SIP Standard. Please confirm if anyone can help on this
- regds Kamlesh

Hi

I am looking for firmware to upgrade NEC DT900 IP Phones to Standard SIP.
Will appreciate if anyone can help on this

Provide an email address. The file is too large to post here.

Thanks Sir, please mail me at kamleshgarg66@gmail.com Thanks a lot !!

Hi Belevedere

Once you mail the file, please text here, thanks for your support

Hi Belevedere

Please share firmware

Am awaiting Firmware

Sent.

Thanks a lot

greetings for the day !

@belevedere

We have firmware file which was provided by you For NEC DT920 12D phone convert to NEC-SIP to Standerd -SIP, while uploading file ftp server show (itkssipee.tgz ) File not found.

please sugest, And provide if you have (itkssipee.tgz ) File.

Hi Belevedere

BK Patel is our technical rep carrying account this NEC IP Phone testing with SIP Server, kindly help on above, thanks !!

Kamlesh Garg

greetings for the day !

As per release notes to convert NEC-SIP Phone To STD-SIP phone require firmware virsion should be greater than v3.x.x.x in Phone but My phone firmware is 2.5.x.x so please provide v.3.x.x.x

(Required NEC-SIP Firmware Version for NEC Std SIP Conversion
Converting NEC-SIP firmware v3.0.0.0 and higher to Standard SIP is supported. Converting versions of NECSIP
firmware earlier than v3.0.0.0 to Standard SIP is unsupported. It is recommended that phones running
NEC-SIP firmware earlier than v3.0.0.0 be upgraded to v3.0.0.0 before converting to Standard SIP.)

if any related materials please send on patelbhaveshk1314@gmail.com

kindly help Thanks

I Want to some knownleage that NEC DT700's Pattern Default XML File. I can't look on DT700. I want to DT700 Load My XML File but DT700 Error. Maybe some error by Pattern XML I don't known I Can't Write XML Pattern Default File. Please Expert Somebody Help me. I want to Pattern True XML File Default DT700. Send into Email:chinji_23@hotmail.com

Hi belevedere,

Would you mind to send me the standard sip firmware for Nec DT700. We have dozens of this phone left at our new office but cannot use, really don't want to waste them.

my email is

Thanks

Done.

Belvedere
Can I Get standard sip firmware?
Ken.rogers at ark4jc dot us

Ken.rogers at ark4jc dot com comes back as not a valid email. Yes I put the proper extension in. I think it does not like the dot after Ken

Of course. It’s dot us not dot com.

Belvedere can you send it to Ken.rogers at ark4jc dot us

Sorry it took so long. I was out of town and off line for a few days. Check your email.

Belvedere
Can I Get standard sip firmware please?

------

Check your email.

I've got it. Thank you so much.

Dear Onix40k
is it working ? if yes, please suggest process.
thanks.

Nope) just stuck on "dhcp completed".

I'm reading syslog, phone looking config files, call history files, but don't connect to sip server.

Any other phones doing good, but not these nec's :(

One dt700 don't boot anymore)

And web-interface is gone.

Hi
Can you get the standard SIP firmware for the NEC DT700
Novinpbx@gmail.com

Check your email.

Hello, thank you for the advice. This version is very old, you don't have the newer version of the standard sip?, please send it to me

That's all I have. It's from May 2022

Hi, I updated my phone, but I can't register to nec Aspire ex or nec sl1000 with sip extension license, is there a solution?

STD SIP is for the NEC UC3 or any non NEC SIP systems.

Does it work with Asterisk or Elastix?

It should work with any standard SIP product.

Hi my friend i was trying to get working a NEC dt700 with my freepbx, and as i read in the forum i need to upload the nec std sip, please can someone send me the files please :) will apreciate youre help, xxxxxxx@xxxxx.net thanks in advice

Check your email.

Hi everyone, have someone done the job?? to connect nec dt700 to asterisk, can someone help me, i will pay

Hi belevedere, would you be able to send me the firmwares for DT730 (ITL-24D-1) please? I am after the NEC-SIP as well as the regular SIP versions if possible. Email is xx@xx.com. thanks

Check your email.

Hi belevedere, thanks so much for that. Would you also be able to give me the latest NEC-SIP firmware versions for DT730 ITL phones please? Email is xx@xx.xx.

Check your email for NEC SIP files.

Really appreciate it - thanks!