Ucp and konftel
Ucp and konftel
(OP)
Thanks guys for helping with previous question,
Can some help me with the Konftel 300IP and UCP 100 system.
I did try to connect the konftel with UCP 100 Konftel won’t get registered on network
Can some help me with the Konftel 300IP and UCP 100 system.
I did try to connect the konftel with UCP 100 Konftel won’t get registered on network
RE: Ucp and konftel
Have you tried putting the mac address in pgm235
and you have put the login details in pgm443
you could also put the mac address in pgm442
i am using an Konftel300Wx on the system that i am working on at the moment but it is registering direct to the iPECS D130 IP Dect base and shows up as just an IP DECT extension
Eddie
RE: Ucp and konftel
harvindersing@hotmail.com
RE: Ucp and konftel
RE: Ucp and konftel
RE: Ucp and konftel
this will allow you to connect non LG sip devices to the system .
you can enable your temp license to get it working instantly for now . but be aware this only lasts for a month . and you only get 6 attempts at that.
RE: Ucp and konftel
Can you please help me with that
Thanks
RE: Ucp and konftel
then login to the confitel gui . via its ip and set the sip server as the internal address of the phone system and set the same user name and password as you have set on the ipecs
RE: Ucp and konftel
I did try I didn’t get through. If you have any documentation can you please send me through or can you please guide me step by step. TIA