Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hi how to resolve the security issu
- Thread starter Harry0077
- Start date
nfcphoneman
Vendor
In PGM 160, try turning off TLS. You may have to change the web server to port 80 in PGM 161.
Jacksonville Florida Telephone Systems
Jacksonville Florida Telephone Systems
You could use a serial cable. Access brandy and enter "web tls 0"
Then try to access IPECs via
Then try to access IPECs via
martinhodge
Vendor
as above just turn tls for web off .
you can either talk some one through on the master handset to do it.
or if you have control of the router .
point port 5003 at the system and then just telnet into the system
2. Start a Telnet session ussing putty etc and the port 5003 on telnet .
3. Press enter – you should get this prompt:-
iPECS-50 System
Version MFIM/AU93M-E.5Gj DEC/11
Checksum: 0
DATE: 01/11/12
TIME: 09:51:33
SITE NAME :
You are on TCP1
ENTER PASSWORD:
4. Type the password “jannie”, and press enter to acces maint> mode,:-
To turn off TLS to assist accessing some older systems: maint> web tls off
you can either talk some one through on the master handset to do it.
or if you have control of the router .
point port 5003 at the system and then just telnet into the system
2. Start a Telnet session ussing putty etc and the port 5003 on telnet .
3. Press enter – you should get this prompt:-
iPECS-50 System
Version MFIM/AU93M-E.5Gj DEC/11
Checksum: 0
DATE: 01/11/12
TIME: 09:51:33
SITE NAME :
You are on TCP1
ENTER PASSWORD:
4. Type the password “jannie”, and press enter to acces maint> mode,:-
To turn off TLS to assist accessing some older systems: maint> web tls off
- Thread starter
- #5
- Thread starter
- #7
- Status