×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

I am running a MICS XC5.0 with a NA

I am running a MICS XC5.0 with a NA

I am running a MICS XC5.0 with a NA

(OP)
I am running a MICS XC5.0 with a NAM 4.0 behind it. The NAM has failed and I can see that the fiber light coming from the NAM is out. Is there any way to fix this or some place to get a new fiber card for this NAM?

RE: I am running a MICS XC5.0 with a NA

Nortel Norstar Application Module Interface Card NTBB8001 or NTBB80AA

Or it's the perfect time to upgrade to 7.1 then get a Callpilot 100 or 150 with 3.1 software.



________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: I am running a MICS XC5.0 with a NA

(OP)
Thanks Curlycord, I was thinking that it was going to come down to that. Would the CP 150 3.1 work on the MICS XC 5.0?

Thanks for your help

RE: I am running a MICS XC5.0 with a NA

Yes it would but strongly suggest to upgrade to 7.1 avoid possible problems.

"R4.0 was very buggy, R4.1 was hit or miss, R5.0 was just plain bad, R6.0 I forget, R6.1 couple bugs?, R6.1 MR stable, R7.1 stable and adds the new DST schedule."

Note the upgrade will also allow for T7316e sets to work properly which allow for proper button layout, red light for messages, special icons on the lower display.
The 2 last expansion ports are freed up, previously reserved for Companion wireless.
Plus anything showing R6.0 or 6.1 here

If you go with 7.1:
Upgrade to 6.1 using the tool or actual 6.1 software, make sure to buy/use XC versions.
Buy/use NVRAM Rls2 if the current is Rls1

________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: I am running a MICS XC5.0 with a NA

(OP)
Thank you, I'll try and do that

RE: I am running a MICS XC5.0 with a NA

If you have PRI, write down your PRI keycode just to be safe before the upgrade. I had an upgrade from 5.0 to 7.1 go sideways and my hardware ID changed. Luckily we were adding PRI after the upgrade and I hadn't activated the keycode yet.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close