RJ11 Connector

Beansie65 · Jul 18, 2020

I am looking for the name of this particular RJ11 connector and where I may purchase a bag from? I have tried searching for this under different names and descriptions, even went to Fluke but no help. This type looks much more durable the the standard RJ-11 and I think I want to replace all my toners and test equipment with these. Thanks in advance.

Jim

curlycord · Jul 18, 2020

I gather it is tabless?

https://www.lanshack.com/plug.htm

http://www.aines.com/aines_products_miscproducts_KPlug.htm

Otherwise..
Standard plug and semi-rigid heat tubing or RJ11 boot might help too.
Smash the plug off with a hammer to save chopping too much off the cord for repair.

________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

TouchToneTommy · Jul 20, 2020

I terminated mine in a standard 8-conductor plug, plugged into an 8-conductor coupler, but snipped the tab so it won't come out without using a spudger to reach in and disengage. THEN, use a double ended modular cord with the K style plugs on each end. Adds just a little bit of bulk to the lead, but you can pop out the short cord and plug in a line cord that is coming from a jack that can't be reached.

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

RJ11 Connector

Beansie65

Technical User

curlycord

Programmer

TouchToneTommy

Vendor

Similar threads

Part and Inventory Search

Sponsor