×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Avaya CM and Firmware Upgrade for TEO TSG-6 [Solution Provided]

Avaya CM and Firmware Upgrade for TEO TSG-6 [Solution Provided]

Avaya CM and Firmware Upgrade for TEO TSG-6 [Solution Provided]

(OP)
Good day all,

I'm looking to see if anyone might have any TEO TSG-6 secure phones with their Avaya CM - we have upwards of 1,000 or so - in several remote locations.
We are in the process of doing a firmware upgrade on those TEO phones. What I'm looking for is insight on how, with THAT many phones in so many locations, would it be possible to "SEE" which phones had been upgraded [or not] ...

I know that in some cases the command 'cdp neighbor' can provide additional information .. and also "lldp" .. but we've not been able to come up with a solution that we would use for remote viewing.
I would appreciate any insight that any may have on this process.
Thank you in advsnce.
-----
Jae

RE: Avaya CM and Firmware Upgrade for TEO TSG-6 [Solution Provided]

snmp?

RE: Avaya CM and Firmware Upgrade for TEO TSG-6 [Solution Provided]

(OP)
@kyle555
-
Okie doke .. more reading .. Thank you .. need to figure out what how to get the OID and stuff like that ..
I will reach back to the vendor to see if there is a specific OID for the TEO phone ...

Thank you again for the providing direction!
-----
Jae

RE: Avaya CM and Firmware Upgrade for TEO TSG-6 [Solution Provided]

If you're consistent with your LAN and you have switches that all do LLDP and have that enabled, you could just as well SNMP poll the switches for the LLDP neighbors and usually for a device type of phone, there's parameters for IP, model, firmware that can be acquired.

I know for Avaya 9600s, they report their firmware to Session Manager, but always 96x1SIP...... so you don't know if it's a 9601, 9608, etc. LLDP is the only way to find out what model of Avaya phone is plugged on the port.

RE: Avaya CM and Firmware Upgrade for TEO TSG-6 [Solution Provided]

(OP)
@kyle555
-
Turns out SNMP is not running .. *sigh*
I tried to also find the admin guide for the TEO for maybe some additional insight - and the most recent one I found was 2018.
Not having much luck today ..
-
Thank you for your help though
-----
Jae

RE: Avaya CM and Firmware Upgrade for TEO TSG-6 [Solution Provided]

(OP)
@kyle555
----
LLDP run results
----
#show lldp nei
Capability codes:
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other

Device ID Local Intf Hold-time Capability Port ID

Total entries displayed: 0

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close