×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

H.323 trunk

H.323 trunk

H.323 trunk

(OP)
We have two sites. One is CM old release 4 and other system is also CM release 8.0. Both system have have H.323 trunk. I followed the NTPs and made H.323 trunk in both systems but i am not able to dial from one system to other and vice versa, Trunks are in service at both system. Below is the trace of a station dialing other CM
01:33:11 G711MU ss:off ps:20
rgn:1 [172.16.3.116]:2836
rgn:1 [172.27.1.21]:2050
01:33:11 dial 3803 route:UDP|AAR
01:33:11 term trunk-group 1 cid 0x16e
01:33:11 dial 3803 route:UDP|AAR
01:33:11 route-pattern 1 preference 1 location 1/ALL cid 0x16e
01:33:11 seize trunk-group 1 member 2 cid 0x16e
01:33:11 Calling Number & Name 6000 Avaya Test
01:33:11 Setup digits 3803
01:33:11 Calling Number & Name NO-CPNumber Avaya Test
01:33:11 Calling party not in public table
01:33:11 denial event 1190: No circ/chan avail D1=0xa023 D2=0x122
extension.

does somebody have working H.323 trunk configuration between two CM.

RE: H.323 trunk

(OP)
Problem resolves. It was signaling configuration issue at OLD CM, By setting below option to "1" it started working. Previously it was set to zero.

trunk group for channel selection=1

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close