×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Avaya Ip Office 500

Avaya Ip Office 500

Avaya Ip Office 500

(OP)
I just installed a new IP office 500 release 11.4 . When I first started it up , I had a combo card in slot 1, a ATM 4v2 in slot 2 and a 8 port digital card in slot 3. The customer decided that they did not need the ATM card so I replaced it with a combo card.
The system will not recognize the 2nd combo card and still thinks it is the ATM card. I have restarted the system, re-seated the cards. I have also changed slots . I moved the combo card to slot 3 and the 8 port digital card to slot 2. After I swapped the 2, the system sees a ATM card in slot 3. So basically anywhere I put the combo card, the system sees it as an ATM card.
Any advice on how to clear it would be greatly appreciated.

RE: Avaya Ip Office 500

In the control section of Manager delete the cards. Sent the config and reboot. It will recognize them as they currently are when it comes back up.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close