Have a B149 on IPO R9.1, Can make conference calls on a PRI circuit fine,Disable PRI using SIP trunks for outgoing, everything works fine, all stations can conference outside calls fine, but analog device's can not conference 2 outside calls, can conference 1 outside party and another internal extension. But if I have a outside call on a SIP line, and I try to conference another outside call, after the flash hook, I press 9 for second dial tone, I will get a fast busy. This is only effecting analog devices with the SIP trunking. Thought I would post this on Tek-tips. When 9 is dialed it goes thru the ARS. Thought of adding another short code for access to the sip trunk and use that as the second call, but would prefer to press 9 again for second call. Thanks.
Red Flag Submitted
Thank you for helping keep Tek-Tips Forums free from inappropriate posts. The Tek-Tips staff will check this out and take appropriate action.
Reply To This Thread
Posting in the Tek-Tips forums is a member-only feature.