×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Remote opening BST Doorphone on BCM50R6
2

Remote opening BST Doorphone on BCM50R6

Remote opening BST Doorphone on BCM50R6

(OP)
Hello Team,
i try to remote open a door by dialling the digital doorphone DN number when auto attendant plays the message but no success. I hear ring back tone but no answer from the doorphone. Also tried to put an additional number on the ccr tree options and when pressing i hear the one moment please prompt then ring back tone but no answer from doorphone. Any ideas?

thanks
Nikos

RE: Remote opening BST Doorphone on BCM50R6

Dialing a Door Phones DN is to call it, not open it.
You need a DOC - Door Opening Controller (NT8B79FB) and a 24v Door Strike installed in the door jam to open the door.

If you dial the DN of a Door Phone there should be an instant connection as if you voice called it (it does not ring) to communicate with the person at the door phone.
You can only call a door phone from another set.

The DOC is to be installed by your phone system as an example.
One power pair goes to the door strike
One digital pair goes to the Door phone
The dip switches on the DOC control which single digit is used to open the door (default is 6) or press OPEN on a 2 line display.

When the door phone button is pressed, answer the call and press 6 or OPEN to activate the door strike if needed.

See the attachment below for the DOC install guide.


________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: Remote opening BST Doorphone on BCM50R6

Curly, good explanation, Star.

Marv ccna

RE: Remote opening BST Doorphone on BCM50R6

Gee thanks Wally!
It's was compliment to go with Firebirds needed guide too.

Hope all is well over and up there eh?

"The DOC is to be installed by your phone system as an example."
While I know that phone systems don't go around installing DOC's when ever they want to, I am sure you all meant what I knew.



________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: Remote opening BST Doorphone on BCM50R6

(OP)
Hello Team, yes i have DOC connected and opens door fine. The question is can i call main office number from mobile hear Auto Attendant press the doorphone DN and let doorphone answer? and then press the opening digit?
Scenario: Customer is outside his gate, does not want to use remote door opening with special remote control, can he dial as explained above and get the door open?
I have installed many digital doorphones both ON BCM and Norstar, these Algo beasts work fine but never did remote door opening. If it is not possible then an analog doorphone will make the trick as it is treated as analogue extension.
Thanks

Regards

Nikos

RE: Remote opening BST Doorphone on BCM50R6

Per above
"You can only call a door phone from another set"

I forgot I had this setup before and see some programming still in my system for it.

I know you cannot forward a spare phone to the door phone then have AA point to that spare phone.

I had fooled my system to call it from outside.
The BCM is smart enough to know it's Voice Mail transferring a call so I had fooled it with a spare Analog Station port and a spare Trunk port and used DISA.
I used to have my Door Phone call a DN then put an Answer DN to that DN on all the other phones, problem was I was getting calls to my mobile from the door phone via FindMe FollowMe while I was away and sometimes just missing the call.
I ended up setting up the DISA to call back the door phone quickly.

Then I ended up using Hunt Groups as I didn't want to answer the door from say, a canoe?

-Cross-connected Analog Station X254 to Analog Trunk 062
-Set Line 062 to Auto Answer and checked the DISA box
-In Dialing Plan/Public put 254 in the Public DISA DN box
You can setup a COS password for this if needed.

Usage: Call your AA number, enter 254, wait for DISA dial tone, dial 222
I used a password and had all that in a speed dial on my mobile.

I do not have a DOC on my system so I cannot dest the open feature.


And just for cics here is how without using DISA

-Cross-connected Analog Station X254 to Trunk 062
-Put Trunk 062 into Pool B
-Created Route 702 to use pool B and to dial External number 222
-Created Dest code 702 to use Route 702
-Under DN 254 I allowed External Transfer, gave it access to Pool B and Forward ALL to 702

Usage:
Call your AA number, enter 254


Call from outside to - Line 125
AA answers Line 125
Dial 254
254 forwards to Dest 702
702 dials 222
Connection is made



________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close