Twinned “Mobile Call Control” Twinned “Mobile Call Control” dsm600rr (IS/IT--Management) (OP) 24 Mar 20 17:25 Hello all, With calls twinned to a cell and “Mobile Call Control” enabled, can the users transfer calls to other extensions that are twinned as well? If so, how would this be done? ACSS RE: Twinned “Mobile Call Control” kwing112000 (Vendor) 24 Mar 20 17:31 dial ** to get system dialtone, Dial the extension and hang up. Kevin Wing ACSS Small and Medium Enterprise (SME) Communications ACS- Implement IP Office ACA- Implement IP Office Vive Communications RE: Twinned “Mobile Call Control” dsm600rr (IS/IT--Management) (OP) 24 Mar 20 17:55 kwing112000: Appreciate it. ACSS RE: Twinned “Mobile Call Control” othammo (TechnicalUser) 25 Mar 20 01:03 kwing112000 is correct, after you dial ** to get system dialtone you can also dial 9 and an external number. *52 will clear a call. It may be necessary to clear a connected call, for example after attempting a transfer and hearing voicemail or ringing. To do this dial ** for dial tone and then *52. ## will return to dial tone after getting busy, number unobtainable or short code confirmation tones from the IP Office.