Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

E1 Tie Trunk CM 5.2 to IPO 11 1

Status
Not open for further replies.

makemetrend

Technical User
Joined
Jan 23, 2019
Messages
399
Location
PH
Hi Everyone,

Just asking if this will work? and if you have some document to share, please let me know. thanks!

Is there need a license for this on IPO? What line subtype should I use?
 
Yes, it would work

Yes you need a license.

qsig would do the trick.

It's pretty straight forward..

And no, we do not have some documentation. Just follow a course at avaya, and you will learn..

 
Thanks Okkie! Will do this tomorrow :)
 
Hi Okkie,

Also this is IPO SE, should we still need the voice networking License?
 
If you use QSIG you would need Voice Networking licenses.

If you set it up as a regular PRI as I suggested when you asked the question in the earlier thread you only need regular PRI licenses for the channels needed.

"Trying is the first step to failure..." - Homer
 
Hi Janni,

In our current setup we dont have a voice networking licenses only we do have PRI license. In PRI Licenses, is it enough to tie trunk on CM? If it's enought, what line subtype wshould we use?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top