Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No answer or busy forward

Status
Not open for further replies.

MoJHK

Systems Engineer
Joined
Nov 16, 2017
Messages
180
Location
HK
Dear experts,

If st A wants to busy forward to st B and wnat to no answer forward to ann after 10 rings. What should I change the coverage path of st A ?
Thx!
 
You need a lot more detail for anyone to be able to help you.
 
Sorry! My question is:

Customer wish to busy forward from st A to st B after 10 rings, also he wants st A to have an ann and drops the call after 10 rings if no answer.
So how I do it in coverage path and vector?

This is I put in coverage path of A


point 1 st B 10 rings point 2 v123 10 rings

v123 is the vector

Thanks !




 
A and B is a station in same cm
 
I have 4 stations,

There are three conditions:
1. All busy, the caller will have ringback tones 10 times and have ann. Then disconnect.

2. No answers for all stations , the caller will have ringback tone 10 times and go to ann. Then disconnect.

3. One of the station is busy, the caller will have 10 ringback tones, then route to another station.

How can I do it in coverage path and write the vector to fullfil those conditions?
 
last point in coverage path should be the vdn, which goes to a vector from there you have several options
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top