I just tried to reset a BCM50 R6 to 2 digits and it wouldn't let me. Valid inputs are 3-7 digits. Maybe earlier releases were different?

Brian Cox
Georgia Telephone
http://Georgia-Telephone.com
http://www.linkedin.com/in/briancox1952

I thought only Norstar Compact 6+16 systems would accept 2 digit for extensions?,

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.myfreesites.net
linkedin

I know that 3X8, 6X16, 8X24 and CICS can go 2, never tried on MICS and BCM.

________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

I think the minimum 3 digit numbering plan came into effect when the later Norstar and BCM's were able to support more than 100 numbers.
For example the BCM 50 could in thoery have 32 IP sets, 4 Analogue sets, 12 digital sets all on the main unit and then 2 lots of 32 digital port modules on the expansion ports. I think that makes 112 extension ports.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.myfreesites.net
linkedin

Hello there...the BCM (3.7) and MICS (6.0+) will do 2-digit DNs (have seen this exact scenario,) however the hunt groups will not work unless you set 3 or more digit DNs.

Verulam Telephone:
Communicating is our Pleasure!

Serving Eastern Ontario