3300 MXE III MCD ver 6.0 sp3

sadic · Oct 23, 2019

Hello guys,

I have a problem with the password of the system, nobody knows what is the actual password, I tried the default password but i cannot get thru in system, so anybody can help me what is the procedure how to set the password to the default.

Your reply is really appreciated.

sadic

techymitel · Oct 23, 2019

Serial cable into the RS232 port in the front using 9600 8N1

If you know the username use this command:

ResetLoginPassword "username" [RETURN]

Or use:

ResetAllLoginPasswords [RETURN]

Will reset passwords to 'password'

sadic · Oct 23, 2019

Hi Techymitel,

Thank you very much for kind reply but do i need another software to use the com1 port of my PC computer to used RS-232 for resetting all password of the system?

Again thank you...

sadic

Billz66 · Oct 24, 2019

use a straight db9 male to DB9 female and putty in serial mode 9600 N81

If I never did anything I'd never done before , I'd never do anything.....

sadic · Oct 24, 2019

Thank you for reply Billz, i'll do this to change the password.

Again thank you for both of you.

sadic

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

3300 MXE III MCD ver 6.0 sp3

sadic

Technical User

techymitel

Technical User

sadic

Technical User

Billz66

Technical User

sadic

Technical User

Similar threads

Part and Inventory Search

Sponsor