×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Display calling digits from BP250 Virtual Extensions

Display calling digits from BP250 Virtual Extensions

Display calling digits from BP250 Virtual Extensions

(OP)
Hallo,

I have a tieline between an Ericsson MD110 and BP250 by IP Trunk. Users at the BP250 call externally by using PSTN lines connected to the MD110. This is done by having the extensions at the BP250 programmed as Virtual extensions. They dial a 0 and pick up an external ISDN line located at the MD110. Problem is the displayed number from a user at the BP250 does not show the extension number but shows only the main pilot number. eg it shows 0700256000 instead of 0700256245 for BP extension 6245. Calls from the MD110 extensions are displays correctly.

Calling back by DID then becomes impossible.

Is there a way of making this config display extension number from which a user is calling from at the BP250, for external dialing?

Your assistance will be appreciated.

RE: Display calling digits from BP250 Virtual Extensions

set send A number in adc bp250 .send A numner on trunk for md110 and that can show all numner withiut a number md just show main number or you most set in nutri.

PG4E

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close