×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

SMDR hidden feature - enable via Telnet
2

SMDR hidden feature - enable via Telnet

SMDR hidden feature - enable via Telnet

(OP)
Does anyone know how to get to the SX2000 telnet interface on MiVB 9.x? In previous versions, we were able to run
lldcli smdr_disc on
to turn on the <> feature in SMDR to indicate which side cleared the call first.
< indicates we, the PBX, cleared the call
> indicates the far end cleared the call.


Seems that MiVB 9 doesn't allow telnet to the SX2000 interface anymore, and you can't enable this any other way that I can find.

I have a customer that is saying they're getting dropped calls - call rings once and hangs up. Callers are complaining that they call in, get the Auto Attendant and press an option - when it rings once or twice and hangs up on them.
The users are saying that it starts ringing and then stops. Nobody there is picking up the phone and hanging up.

RE: SMDR hidden feature - enable via Telnet


SSH into the MiVB and run:
/sysro/bin/mtce-term

Ctrl-c to exit


Better to look at the CCS trace for this problem though? It would show where the clear comes from and a reason.
You don't say whether it's E1/T1 or SIP trunks - if it's SIP then 'sip tcpdump on' and have a look at the pcap.

RE: SMDR hidden feature - enable via Telnet

(OP)
This is a T1 PRI. I can't monitor it 24x7 and enabling the SMDR feature will help address it. The users are saying this is happening once in a while - maybe a couple times a day. They're trying to log when it happens to help us determine the issue.

I do think the carrier has found something wrong though.

RE: SMDR hidden feature - enable via Telnet

(OP)

root@Mitel:~# /sysro/bin/mtce-term
/sysro/bin/mtce-term: Error, INPUTRC not set and /sysro/bin/inputrc not found
maintenance terminal connected

Ctrl-C got me back out to the prompt, can't do anything further with it.

I must be missing something.



RE: SMDR hidden feature - enable via Telnet


When you get the 'maintenance terminal connected' message you can enter your commands.

Try some other commands that show output:

where
logs read smdr new 10

You should be able to enter your lldcli command in here - but it won't show any confirmation messages

RE: SMDR hidden feature - enable via Telnet

2
MiVb 9.0 Process:
 To enable the SMDR flag:
• Establish a SSH connection to the MSL IP
• Login as root
• Issue the following command:     # /sysro/bin/debug-term
• Issue the following command:     > smdr_disc on
• Issue a <Ctrl C> to exit the debug terminal
To disable the SMDR flag:
• Repeat as above with:  > smdr_disc off

If I never did anything I'd never done before , I'd never do anything.....

RE: SMDR hidden feature - enable via Telnet

Hello everyone,
I never knew about this command. It could be useful when troubleshot intermittently drop call problem.
I tried to follow Billz66 to issue it in MiVB9 and it works fine. But when I issued "lldcli smdr_disc on " in sx2000 interface in MiVB 8, it said "you are not authorized to use this command". I logged in as installer.
Could anyone advise how to use it in MiVB 8 and earlier?

Kelvin

RE: SMDR hidden feature - enable via Telnet


Log in as 'system'

RE: SMDR hidden feature - enable via Telnet

It works great! Thanks techymitel

Kelvin

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close