×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Codes 659 and 635 will not be excepte6

Codes 659 and 635 will not be excepte6

Codes 659 and 635 will not be excepte6

(OP)
When dialing codes 659 or 635 all I get is a busy signal. 653 works. I tried to program a button for each code and that didn't work.
Thanks std system

RE: Codes 659 and 635 will not be excepte6

You don't mention what system you're using - the term Starplus covers a great deal of territory. Nor do you mention the type of lines. Do you have CID enabled on system and from carrier? Do you see CID info when a call rings in? When using analog lines, you must set ring delay timer to at least five seconds in Flash 40, pace C, button 2 so that system has time to collect CID info from carrier. With the limited info provided, best advise is to review the install docs and make sure you're programmed appropriately. Good luck.

Mike Forrence
www.goteamvox.com

RE: Codes 659 and 635 will not be excepte6

(OP)
It's STS not std. Caller ID working. Just can not look back using 659 or 635. Can use 653 to view name with number.
.

RE: Codes 659 and 635 will not be excepte6

I suspect that you have an issue in the ICLID Call Management Tables. I'd enable System ICLID in Flash 05, B21

Mike Forrence
www.goteamvox.com

RE: Codes 659 and 635 will not be excepte6

(OP)
I did as you suggested and it had no effect.
Thanks for responding. I'm going to change the unit.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close