WINSPM Central Telephone Programming
WINSPM Central Telephone Programming
(OP)
I'm trying to access Central Telephone Programming in WINSPM Standard but not having any luck finding the correct menu. Instructions that I've found tell me to select "Sys Program" from the SPM Main Menu, then select "More (PgUP)", which should then display "Cntr-Prg" as a menu option.
However, selecting "Sys Program" brings up a window that says "System Setup:" (screenshot attached), not System Programming.
Does WINSPM behave differently while the system is in use than during idle time? Or is there a problem with my WINSPM install and I need to uninstall/re-install?
Yooper-Ken
However, selecting "Sys Program" brings up a window that says "System Setup:" (screenshot attached), not System Programming.
Does WINSPM behave differently while the system is in use than during idle time? Or is there a problem with my WINSPM install and I need to uninstall/re-install?
Yooper-Ken
RE: WINSPM Central Telephone Programming
Mike
RE: WINSPM Central Telephone Programming
Once in the programming menu, there is a new System Programming button, for programming System parameters. Press the More button and you will then see Centralized Telephone Programming
RE: WINSPM Central Telephone Programming
Got in, phone re-programmed. Again, thank you teletechman.
Yooper-Ken
RE: WINSPM Central Telephone Programming
RE: WINSPM Central Telephone Programming