Is there any special considerations when rebooting two SCD508 devices and a third oai device? They all chained together and connected to an old norstar.
There is no power switches but they are all connected a power bar.
I am afraid if it loses power it will lose its registers handsets or something.
We are tempted to power cycle the system because we are having issues with one of the lines. #8 on the mcu has a dull tone when ever we register a handset to it.
I appreciate any thoughts you can share on this.
There is no power switches but they are all connected a power bar.
I am afraid if it loses power it will lose its registers handsets or something.
We are tempted to power cycle the system because we are having issues with one of the lines. #8 on the mcu has a dull tone when ever we register a handset to it.
I appreciate any thoughts you can share on this.
