Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Map Page General (Feature 6 0) to extension
- Thread starter cwozniak
- Start date
curlycord
Programmer
You cannot tell a DN it will be a feature instead of a station.
You can program a button on a phone or use a shorter code as explained here in the FAQ's
In your case you probably just want to program Feature 631 to a button (or write over an existing page button) or just use that feature from now on if low on buttons.
Feature 631:
6 says page
3 says both sets and speaker
1 says Zone 1
________________________________________
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
You can program a button on a phone or use a shorter code as explained here in the FAQ's
In your case you probably just want to program Feature 631 to a button (or write over an existing page button) or just use that feature from now on if low on buttons.
Feature 631:
6 says page
3 says both sets and speaker
1 says Zone 1
________________________________________
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
