Meridian: Reconfiguring VM on sets

Sounds like Reception has been playing with Feature 1....also pay attention to what you see when you press the MSG key as it will say what or who called.

Possibilities that sent the message:
-Call Answer from the Carrier
-Internal voice mail system
-Another user

Feature 1 = "Send Message"
Basically a poor mans voice mail system where there is no mailbox, just the display.

Example of usage:
Reception wants to notify 222 to call them back when they return:
Feature * 1 then ADD, then 222 (or add more sets if needed)

222 now has "Message for You"
222 should press the MSG key to see what or who called, then the Call key which will call the person or item that sent the message.

For smaller sets without the 2 line display:
Feature 65 to see who or what sent the message
Feature # 65 to clear the display.

MC & HNY



________________________________________


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN

Fantastic!
Thank you for pointing me to that feature... I otherwise wouldn't have been able to diagnose what the problem even was.
Have a wonderful holiday.